// -->
Idenity Graphic
home
legal
contact
about orison
other orison products

EVAPO-RUST

Cooling System Cleaner

MSDS

SAFELY REMOVE RUST FROM ENGINE BLOCKS & COOLING SYSTEM

EVAPO-RUSTTM Cooling System Cleaner is a concentrated rust removing formulation based on our 3-TIME AWARD WINNING rust remover technology. EVAPO-RUSTTM Cooling System Cleaner, when used as directed, is non-corrosive to steel and will not harm copper, brass, aluminum, plastic, rubber, silicone, wood or vinyl. EVAPO-RUSTTM Cooling System Cleaner will not remove coatings such as non-oxide paint or chrome that are still bonded to the surface. Not for use with magnesium or magnesium alloys.

For Professional Restoration!

  • No tear-downs
  • Fast acting
  • Easy to use
  • Professional results
  • Non-Toxic
  • Non-Flammable
  • Non-Corrosive
  • Biodegradable

TYPICAL PROPERTIES

  • Appearance Amber, Slightly Viscous
  • Odor Mild odor
  • pH @ 1% 6.0 – 7.0
  • Environmental Data Biodegradable

Instructions For Use:

1) Drain the water/anti-freeze from cooling system.
2) Pour 1 quart (32 ounces) into cooling system for every 2 gallons of water/anti-freeze removed.
3) Add water to cooling system until full.
4) Start engine and allow engine to run with heater on for 1 - 2 hours.
5) Drain (solution should be black) and flush radiator/cooling system. Repeat steps 1 - 5 once more if necessary.
6) Fill cooling system with appropriate anti-freeze/water.

FREE SHIPPING OPTION ON INTERNET PURCHASE! (lower 48 states only)

Evapo-Rust
Cooling System Cleaner
1 Quart
(32 Ounces)
$24.95
Quantity:
| home | legal | distributor | contact |